Lifting Type Check Valve

Description

– Exceptional resistance to impact and pressure.

– Due to the disc in the center of the shaft and the shaft bearings on both sides of the disc, the valve can be installed in any position (horizontal, vertical, or at an angle).

– Extremely low-pressure drop, owing to the more significant fluid passage through the valve’s nominal diameter.

Due to the stainless-steel shaft, spring, and sealing ring, Durability.

– Prevent shock to pumping systems when power is abruptly cut off and the direction of water flow is reversed due to the presence of stainless-steel springs behind the disc and the valve closing rapidly.

– The ability to install butterfly valves back-to-back, which is not possible with other check valves such as wafers, weight levers, or hinges (here we consider the most petite length of the body for the butterfly valve to enter if part of the disc Butterfly valve into the body of the check valve, again the function of none of the valves is not disturbed).

– Coating: Electrostatically sprayed furnace powder paint.

– Final examination following ISO 5208 or DIN EN 12266.

– Dimensions of the valve’s face to face following DIN 3202-F15 standard.

Drilling flanges following DIN 2501 DIN EN 1092-1 equivalent to ISO 7005-1 (according to customer request, valve flange according to ANSI standard is also produced in 150,300 classes).

– According to the customer’s order, check valve valves with anti-shock springs and a working pressure of 63 Bar are manufactured.

Specifications and applications of Check Valves Lifting Type :

Environment (operating fluid)	Water
Operator type	Fluid flow
Application domain	Pumping station, water distribution network
Category	Check valve to deal with hammering
Body Material	Steel