Introduction to Fermentation Solutions
Yasmin Trading is a leading provider of Fermentation Solutions, delivering cutting-edge equipment and turnkey process lines for industrial fermentation. We serve food, pharma, biofuels, and agro-processing industries across Egypt, Saudi Arabia, UAE, and Africa, helping businesses optimize production efficiency and scale operations. With customized fermentors, bioreactors, purification, and drying systems, we offer innovative, reliable, and sustainable solutions to drive your success.
Nowadays, fermentation is widely applied in industry of pharmaceutical, food, energy, chemical, agriculture and environmental protection. The biggest difference between fermentation and other chemical industries is that it is a biochemical reaction carried by organism.
Its main features are as follows:
- Generally, the fermentation process is biochemical reaction that proceed at normal temperatures and pressures, with safe reaction and simple condition requirements.
- The raw materials used in fermentation are quite extensive, usually based on starch, molasses and other agricultural products, and the reaction can be proceed by adding a small
amount of organic and inorganic nitrogen sources and other nutrients. Because of the different categories, the microorganism can be selectively taken advantage of required nutrition.
Based on this feature, it can make use of waste materials etc. as raw materials for the fermentation to renovate and renew of biological resources.
- The fermentation process is performed by the automatic adjustment of the organism, so
the reaction specificity is strong and can get more single-metabolites; and it can proceed
highly selective chemical conversion reactions to the certain parts of complex compounds,
such as oxidation, reduction, etc. and also can produce some more complex polymer
compounds. - The microbial strain is the basic factor of fermentation, through breeding, it can get high yield excellent strain, also can get some products which are difficult to be produced by conventional methods.
- The fermentation industry has the advantages in certain aspects that other industries cannot replace. Compared with the traditional fermentation, the modern fermentation engineering has its superiority beside the above characteristics. Except the microbes, we can also utilize “engineering bacteria” to react with aid of cells and enzymes of animal and plant. The equipment comprises not only the conventional fermentation tank but also a variety of bioreactors with high automation, so that the fermentation level get greatly improves on the original basis.
The Fermentation Process
Fermentation is a biological reaction driven by microorganisms like bacteria, yeast, and fungi. These microbes break down organic materials—such as starch, glucose, or agricultural waste—to produce valuable compounds.
Key Benefits of Industrial Fermentation
✅ Eco-Friendly & Sustainable: Uses renewable resources like agricultural byproducts.
✅ Cost-Effective: Reduces dependency on synthetic chemicals.
✅ High Selectivity: Produces precise compounds with minimal waste.
✅ Scalability: Supports small-scale and large industrial production.
Optimize Your Fermentation Process with Cutting-Edge Equipment! Get High-Efficiency, Reliable Solutions Tailored to Your Needs.
Explore YasminTrading Today!
we cannot publicly display the full details of our complete processing lines and machinery.
However, if you’d like to learn more about our extensive expertise or discuss solutions tailored to your specific production needs, we invite you to get in touch with one of our specialists.
They will be happy to provide you with further information, pricing details, and a free consultation to guide you through the process.
Our Turnkey Fermentation Solutions
We offer customized, end-to-end fermentation solutions for businesses in various industries:
🔹 Food & Beverage: Dairy (yogurt, cheese), beer, wine, kombucha, vinegar.
🔹 Pharmaceuticals & Biotech: Antibiotics, probiotics, enzymes, vitamins.
🔹 Biofuels & Bioplastics: Ethanol, biogas, PLA production.
🔹 Agriculture & Animal Feed: Fermented feed, biofertilizers, crop protection.
🔹 Chemical & Industrial Applications: Xanthan gum, lactic acid, citric acid, MSG production.
We design and supply ready-to-use, fully automated fermentation systems tailored to your industry needs.
Our Fermentation Equipment & Process Lines
We provide high-performance fermentation equipment designed for efficiency, precision, and automation.
Seeding Tank
The seeding tank is a device for expanding the industrial cultivation of microorganisms,
widely used in the fermentation industry. | t can achieve heat exchange, ventilation, stirring
and other functions, and is a fully enclosed and hygienic fermentation specialized equipment.
Technical Features
- The sealing performance can ensure sterilization operation.
- Less internal accessory equipment, smooth surface.
- Enough strength and long working life.
- The design pressure: 0~0.5MPa
- The design temperature: 0~200°C
- Tank material: SS304-316L
Fermentor
The fermentor are the main equipment for industrial microbial cultivation.
Technical Faetures:
- The control system is easy to operate and performance is stable.
- The inoculation way is diverse and reliable.
- Sterilizing online, safe and reliable.
- In the course of agitation, the defoaming device keeps no bubble accumulation.
- Through the stirring and uniform mixing to get better fermentation.
- The fully enclosed design can ensure that the materials are always under
non-pollution environment.
Tank material: stainless steel - The design temperature: 0~200°C
- The design pressure: 0~0.5MPa
Tube and Shell Evaporator
MKTE series multi-stage falling film evaporator concentrates the solution by means of vaporizing the thin solution through film-falling principle. It adopts continuous production and its features in high concentration ratio (1/5-1/10), large viscosity scope (> 400CP), good heat-transferring effect, large processing capacity etc. In this case, it can be introduced on vaporizing materials which are high heating sensibility, high concentration, high viscosity and corrosive. Therefore, it is widely used in fermentation, food, milk, alcohol and starch industry. The equipment with a higher heat-transferring ratio, so the temperature difference requested is small. It can be combined into two
stage, three stage, four stage, or multi-stage evaporator system on the basis of different material characteristics and evaporating concentration. In addition, it can be used as waste-heat evaporator with the resources of waste steam from bundle dryer or other heating resources with low thermal! value such as condensate steam. In this way, raw steam consumption can be greatly reduced for energy saving. It is economically beneficial when waste steam can be completely used and raw steam is saved.
Crystallizer
MKCL Crystallizer is cooling crystallizing equipment. During the work process, crystal slurry with a certain saturation level is injected from the feeding port on the upper part of the crystallizer, gradually cooling down under the action of cooling water, and the crystals gradually grow to complete the crystallization process. It is widely used in the crystallization of chemical products such as glucose solution, MSG, xylose, xylitol, and salts in the chemical industry.
Jet Cooker
MKJC series full automatic liquefaction jet cooker is a new type of liquefaction injector, which stands a leading level of the similar products.
There is no rusting, no jamming in it. In the steam pressure over than 0.5MPa, the starch can be liquefied by the jet cooker completely, high liquefied substrate concentration, high steam thermal efficiency and high conversion rate of starch.
Plate Filter Press
MKFP series plate filter press is usually used for solid-liquid separation in coal, oil, chemical, textile, food, pharmacy, metallurgy industries etc.. In the fermentation industry, it is used to filter the suspended solid in the fermentation broth. On the basis of several patented technologies, the shaping effect of polypropylene has been enhanced, it features in smooth surface, high intensity, light weight, corrosive proof, innocuous and odorless. The hydraulic device is employed for pressing and releasing the frames and plates. The electrical contact pressure gauge is available to automatically maintain pressure. The whole Support frame is made by welded steel with high intensity, So it is able to suffer from high pressure, which provides the machine with stable performance and long life. The equipment can be equipped with PLC, relay control and many other safety-guarding devices, therefore Andoreaicniats ating the operation will be automatic and easy to control, and the operator will work safely. Girder is equipped with abrasion-proof nonmetallic tracks, which are formed in one piece. It adopts bridge-type flexible frame. Maximum pressure is 22MPa.
Sterile-diaphragm-stop Valve
This valve can work in an environment of 150°C. The valve core is made of 4F/PTFE and body is made of SS316L. The working life of this valve is 1.5 years under extreme condition, no need to exchange gaskets. Automatic/Manual adjustment are available.
Blogs
Top 9 Agro-Processing Examples and Industries in 2025
As 2025 kicks off, the agro processing industry is still and continues to be one of the most important industries... read more
Top 15 Profitable Agro-Processing Business Ideas for 2025
Agro processing is burgeoning in 2025, exhibiting excellent prospects for investors and entrepreneurs. Agro-processing refers to changing raw agricultural commodities... read more
What is Agro Processing? [A Complete 2025 Overview]
Agro-Processing refers to the act of adding value to the main agricultural, fishery, and forestry outputs. The final product is... read more
Is Bitumen Environmentally Friendly?
An important question in the road construction industry is: Is Bitumen environmentally friendly? We need to consider the environmental impacts... read more
Bitumen Ductility Test: A Comprehensive Guide
Bitumen is a material used in road construction projects. An essential feature of this material is ductility. Bitumen ductility is... read more
Bitumen Emulsion Definition, Advantages and Uses
Bitumen emulsion is an improved form of the traditional one. This material is a liquid dispersion of Bitumen in water.... read more
How Can You Calculate Bitumen Quantity for Road?
A base question in any road construction project is how to calculate bitumen quantity for roads. Key factors in this... read more
Bitumen Specific Gravity Test: Definition and Procedure
Bitumen has an essential feature, which is its specific gravity. A bitumen specific gravity test determines it. There are some... read more